Invention produces cleaner water with less energy and no filter

The same technology that adds fizz to soda can now be used to remove particles from dirty water. Researchers at Princeton University have found a technique for using carbon dioxide in a low-cost water treatment system that eliminates the need for costly and complex filters.

Carbon dioxide changes the chemistry of contaminated water, which causes particles to move to one side of a channel and splitting the flow into clean and dirty streams

The system injects CO2 gas into a stream of water as a method of filtering out particles. The gas, which mixes with the water in a system of channels, temporarily changes the water's chemistry.

The chemical changes cause the contaminating particles to move to one side of the channel depending on their electrical charge. By taking advantage of this migration, the researchers are able to split the water stream and filter out suspended particles.

"You could potentially use this to clean water from a pond or river that has bacteria and dirt particles," said Sangwoo Shin, an assistant professor of mechanical engineering at the University of Hawaii at Manoa.

Shin, the lead author of a paper describing the process, performed the research as a post-doctoral researcher in the laboratory of Howard Stone, the Donald R. Dixon '69 and Elizabeth W. Dixon Professor of Mechanical and Aerospace Engineering at Princeton.

In a paper published 2 May in the journal Nature Communications, the researchers describe how they built a laboratory-scale filter that removed particles three orders of magnitude (1,000-fold) more efficiently than conventional microfiltration systems. The system is low energy, with bottled carbon dioxide as the only moving part (besides the pump responsible for the flow), and has no physical filter or membrane that can clog or require replacement.

Carbon dioxide alters water's chemistry by making it slightly more acidic - the tart taste of carbonic acid is familiar in most sodas, and its absence is a reason for flat soda's unpleasant flavour. In chemical terms, the acidity means that when CO2 dissolves in water it creates charged particles called ions. One of those ions, a positively charged hydrogen atom, moves very quickly through the water solution. Another, a negatively charged bicarbonate molecule, moves more slowly.

The ions' movement through the water creates a subtle electric field; this field draws particles in the water - which have either negative or positive charges of their own - toward one side of the water stream.

Because most contaminants have some amount of surface charge, the electric field is an effective way to strain them from water. The researchers' device takes advantage of this electric sorting by drawing the contaminants to one side of the flow and then splitting the water into two channels. One path carries water containing the contaminating particles and the other holds clean water. Because the system does not have a membrane or a mechanical filter, clogging is not a problem.

To maintain the electric field, the researchers needed to keep the ions moving through the water channels. They accomplished this by making the channel walls out of material that is permeable to carbon dioxide, in this case silicone rubber (polydimethylsiloxane).

Pressurised carbon dioxide diffuses through one wall of the channel and permeates out the other side. Shin said if the channel is enclosed and designers could capture the carbon dioxide gas for later use. When finished, the dissolved CO2 can be easily removed by exposing the water to air so that the water contains only normal levels of carbon dioxide, which is not carbonated.

The researchers thought of the technique while examining the motion of colloidal particles in a salt gradient - a term for the interface between bodies of salt and fresh water. In a salt gradient, the difference in chemistry of the two solutions causes pressure on particles. Shin said the researchers were observing the motion of charged particles in the salt water when they realized the phenomenon could be useful as a filter.

Salt - sodium chloride - would not be useful for water purification because the salt would remain in the water after filtration. So the researchers thought to substitute carbon dioxide because it is cheap, not harmful for humans to ingest and as easy to remove from water as opening a can of soda.

The researchers said using a soluble gas as a method of controlling particles in a solution could lead to other industrial or scientific applications beyond water filtration. "The principles being explored in this research we hope will also be impactful in other research areas," Stone said.

Shin said the CO2 system could be particularly useful in the developing world because it does not require the installation and replacement of filters. The idea may be useful for portable systems. It is also relatively low cost, only requiring a canned source of carbon dioxide to use.

"It is definitely able to scale up to a hundred litres per hour, which meets a practical household standard," Shin said.

Another use would be as a supplement to a desalinisation plant. Many types of desalinisation use membranes to strain out salt molecules, but biological particles including viruses and bacteria are able to pass through the membranes.

Shin said the carbon dioxide system could strain out the particles before or after the water passes through the desalinization membrane, reducing the need to treat the water with chemicals such as chlorine.

Shin is now working on methods to scale the system for possible use in water treatment plants to supply larger communities. He said the basic science works, but further engineering is needed to create a large-scale carbon dioxide filter.

"In Hawaii, we have a fresh water problem," he said. "We hope to scale up the device to help solve it."