Anti-aging elixir for solar cells

Photovoltaic modules deliver power without risks to the environment and climate. But solar-power is expensive. Therefore, it is imperative that the modules last as long as possible, 25 years or more. Fraunhofer researchers in the USA are now investigating materials to protect solar cells from environmental influences to meet that goal.
 
Sometimes it's just a couple of cents that decide the success or failure of a technology. As long as solar power, for instance, is still more expensive than energy extracted from fossil fuels, photovoltaics will not be competitive on the broad open market. ''Power generation from solar energy continues to be reliant on public subsidies – this is no different in the USA than in Germany,'' explains Christian Hoepfner, scientific director of the Fraunhofer Center for Sustainable Energy Systems CSE in Cambridge, Massachusetts, USA. ''If we want renewable energy to penetrate the global market over the long term, then we must ensure it gets cheaper.''
 
There are no silver bullets to reach this target as efficiency cannot be arbitrarily increased, and it is expensive to produce solar cells and modules. If you want to change something here, you have to solve a puzzle with many variables. Engineering teams around the world are searching for new technologies and production methods to make cells and modules cheaper, more efficient, more durable and reliable.
 
Silicone – steady and resilient
Silicone is one of the promising materials. It is a highly unusual substance – neither inorganic crystal nor organic polymer – but related to both. While PV modules have been encapsulated with silicones, until now, however, they were not widely used for laminating solar modules. Lamination is a protective coating that surrounds the fragile silicon wafer. Today most manufacturers of photovoltaic cells use ethylene-vinyl acetate, or EVA for short.
 
In order to determine if silicone could replace the ethylene-vinyl acetate a team of experts worked together: researchers from Fraunhofer and from Dow Corning Corporation, the world's largest manufacturer of silicones used in medical technology, cosmetics, the automotive industry, paper processing and electronics.

The scientists coated photovoltaic cells with liquid silicone. ''When the silicone hardens, it encases the cells; the electronic components thus have optimal protection,'' says project manager Rafal Mickiewicz.

Experts at CSE constructed prototypes from the silicone-laminated cells, and tested these photovoltaic modules in a climate chamber at low temperatures and under cyclic loads. Afterwards the module performance was tested with a light flasher. In addition the researchers used electro-luminescence-imaging for the detection of micro cracks.  A comparison of the results with those of conventional solar modules proved that silicone-encased photovoltaic modules are more resistant to cyclic loading of the type modules experience in strong winds, in particular at a frosty minus 40 degrees Celsius.
 
''Dow Corning Corporation collaborated with researchers at the Fraunhofer CSE Photovoltaic Modules Group for two years. This collaboration significantly improved our understanding of the materials requirements of our solar modules, particularly in regard to sustainability and output,'' concludes Andy Goodwin, Global Science & Technology Manager, Dow Corning Solar Solutions.