NTPC develops geo-polymer aggregate from fly ash
20 Nov 2020
1
The research project meets Indian Standard parameters confirmed by NCCBM
Public sector NTPC Ltd, India’s largest power producer, has successfully developed geo-polymer coarse aggregate from fly ash. The development will help in replacing natural aggregates reducing the impact on environment.
NTPC has successfully developed Geo-polymer coarse aggregates as a replacement to natural aggregates. The technical parameters as per Indian standards for its suitability to use in concrete works were tested by NCCBM, Hyderabad and the results are in acceptable range.
NTPC’s research project on production of geo-polymer coarse aggregate from fly ash has met the statutory parameters of Indian standards and was confirmed by the National Council for Cement and Building Materials (NCCBM).
The development is NTPC’s R&D achievement in expanding the horizon in ash utilisation.
India’s demand for these aggregate touches close to 2,000 million tonnes mark every year. The aggregate developed by NTPC from fly ash will help in meeting the demand to a great extent and will also reduce the impact on environment caused by natural aggregates which require quarrying of natural stone.
In India, every year, approximately 258 million tonnes of ash is produced by coal fired thermal power plants. Out of this around 78 per cent of ash is utilised and the balance remains unutilised in ash dykes. NTPC is exploring alternative ways to utilise the remaining ash which includes the current research project to generate aggregates using more than 90 per cent ash.
The geo-polymer aggregates find its extensive usage in construction industry turning the ash eco-friendly. These aggregates are extremely environment friendly and does not require any cement for application in concrete where the fly ash based geopolymer mortar acts as the binding agent. The geo-polymer aggregates will help in reducing carbon emission and has great potential for reduction of water consumption.
